In residential new construction, Arronco Comfort Air understands that the initial cost of your new home is only one portion of your investment. Heating and air conditioning systems are among the most complex systems that can be found in your home, allowing energy and maintenance to play a major part in your total cost of ownership.
Because of this, we work with home builders to build homes above and beyond the minimum ENERGY STAR® standards, which is far beyond the standard energy code for new home construction. We can offer new homebuyers the option to have the most energy-efficient heating and air conditioning system available.
Fill out a contact form or call Arronco at 513-474-7555 to get started on your HVAC installation service today!
Central air conditioners and heat pumps are part of a split system in which there is an outdoor condenser along with an indoor evaporator coil. The air conditioner or heat pump transports heat from one unit to the other.
During the summer, the air conditioner takes heat from the indoors and transfers it outside, leaving cooled air indoors. This air travels through ducts and is distributed throughout your home. Refrigerant is used for the cooling process as the compressor changes the substance into a high-temperature, high-pressure gas. The gas loses heat as it flows through the outdoor coil, causing the refrigerant to flow through as a liquid into the evaporator coil. The refrigerant then expands into a low-temperature, low-pressure gas. This gas absorbs heat from the air through your ductwork, leaving cool air in its wake. This gas returns to the compressor to begin the process all over again.
The Arronco team works diligently to ensure that you are comfortable throughout the year. As one of the most trusted HVAC companies in the area, we have provided quality customer service to homeowners for over 30 years. Some of the installation services that we provide include:
Our professionals will talk with you about the system you want to put in place in order to create a setup that meets your needs and fits your budget. Subject to approved credit, financing options may be available to assist you with installing a new system, making the investment easier to handle.
There are a number of important factors to keep in mind when considering the installation of a new HVAC system. One critical consideration is the energy efficiency of the unit.
Generally, the more efficient the system, the more energy savings you can enjoy. Energy efficiency is usually measured by a SEER rating, which stands for the Seasonal Energy Efficiency Ratio. Typical ratings are between 12 and 23, with the higher numbers being the more efficient models.
This ratio is typically shown on the EnergyGuide sticker on the air conditioner so that you can compare it with other models. To qualify for an ENERGY STAR® rating, the unit must have a SEER of at least 14.5. Also, consider the sound levels when you are deciding on a new model. Our professional technicians can also discuss budget and ways to finance your new system.
When building your new home, temperature control throughout the home should be considered, especially in multilevel homes. In two-story homes, the second floor will most always be warmer than the first floor because of rising heat. This is especially noticeable in the summer because of warm air rising and a hot attic above.
Many times, multiple systems are used to control the temperature on different levels of the home. Another way to control temperature on multiple levels is through zoning a single system.
In a zoning system, dampers that mechanically open and close are installed in the main trunk lines to control airflow. These dampers are controlled by thermostats located in each zone. Many times, in a two-story home for example, there is a duct system that feeds to first floor and another duct system that controls the second floor of the home. Two separate thermostats are installed – one on the first floor and another on the second floor. With a separate thermostat on each floor and dampers to control the airflow, zoning systems do an excellent job of maintaining desired temperature on each floor. The majority of the cooling of the home is done through the second-floor duct system while the majority of the heating is done through the first-floor duct system.
At Arronco Comfort Air, we pride ourselves on educating our customers so they can make the most informed decision about their home’s comfort. We also want you to know what you can do to maintain optimal performance and savings.
If you still have questions or would like to set an appointment, feel free to call us at 513-474-7555.
Give us a call if you’re interested in:
“Such an incredible organization! The service technician, Sean was professional, polite and extremely thorough. He took time to make sure…”
“We're very grateful for such a rapid response to our call, even more so, as our issue (failed coil) will…”
“Arronco has has nicest, most knowledgeable and conscientious team of providers. Our most recent service appointment continued the trend. We're…”